Username | Profile | Tuned | Comments |
---|---|---|---|
Enter result | |||
Groogee | Sony Vaio, Intel i3-3217U (4) | [1] |
1.
All test steps passed OK without error. Switched between profiles multiple times OK. Didn't notice any difference in power consumption/performance between balanced and performance. The PowerSaver
profile did have a noticeably lower inactive power consumption due to display auto-dimming after 30 seconds.
|
Lemonzest | ? | [1] |
1.
Been running tuned-ppd on my Dell Latitude E7470 and Lenovo ThinkPad T470 for about a month now since It was suggested to me in the Fedora Discord on my Fedora 40 Cinnamon Install, Profile changes on
AC/Battery status fine.
|
Markr217 | Fully updated F41 VM on Silverblue host, hardware: Lenovo E15 laptop, i7, 40GB memory | [1] |
1.
Steps 1-5 all complete as expected. Optional verification toggled between the different profiles several times
without issues. Could not verify power consumption w/powerstat due to running in vm and
do not have available
hardware to install on at the moment.
|
Reinier | ? | [1] |
1.
I have been running tuned-ppd as a replacement of power-profiles-daemon without any problems since 2024-06-09. Fedora 40, KDE on a Dell XPS13 9316. Automatic changing based on battery status,
manually changing using the systray app and changing the mapping to my-favourite-profile via /etc/tuned/ppd.conf all works fine.
|
abdujabbar | Fedora-Workstation-Live-x86_64-41_Beta-1.2 on Gnome Box | [1] [2] |
1.
tuned-ppd was already active.
The user can select power profiles in GNOME Control Center’s power panel without errors.
Once user changed the "Power Mode" in the top-right corner, power
profile changes to the selected mode correctly.
In CLI, the command "tuned-adm active" shows the correct active profile that matches the selected profile.
The name mapping in /etc/tuned/ppd.conf shows the selected profile correctly.
2. 1. tuned-ppd was already active. 2. The user can select power profiles in GNOME Control Center’s power panel without errors. 3. Once user changed the "Power Mode" in the top-right corner, power profile changes to the selected mode correctly. 4. In CLI, the command "tuned-adm active" shows the correct active profile that matches the selected profile. 5. The name mapping in /etc/tuned/ppd.conf shows the selected profile correctly. |
bmenant | Linux fedora 6.11.0-0.rc6.49.f41.x86_64 | [1] |
1.
Package `tuned-ppd` already installed on a fresh install (20240908 netinst build); dnf swap command has nothing to do.
Switching multiple times from control panel or top-right corner are properly
reflected in other places and `tuned-adm active`.
Don’t know how to test effectiveness of different profiles on a VM.
|
clnetbox | Fedora 40 Workstation | [1] |
1.
I replaced power-profiles-daemon with tuned-ppd a few weeks ago and everything works as expected.
|
derekenz | F41 Workstation VM on an AMD 5600g system | ||
ersen | Fedora 41 WS on KVM | ||
geraldosimiao | Fedora-41 Workstation Beta 1.2 - KVM | ||
gokulakannan | Workstation, KVM, en_US, x86_64, Fresh | [1] |
1.
All the three power modes are working as expected after switching to tuned-ppd.
|
joaquinvacas | HP Elitebook 845 G9, Fedora Workstation 40 | [1] |
1.
Everything went fine. From overall switching through available profiles. Using tuned-ppd Switched between profiles multiple times, but PPD doesn't remember last profile, so at every reboot it goes to
the default written on tuned-pdd config.
|
nicodelle | F41 workstation VM on amd ryzen7730U | [1] |
1.
#2312159,
Trying the test immediatly after booting resulted in an inconsistency across the power mode shown in the settings, and the one shown in the control panel. Changing one did NOT affect the other, and
the command "tuned-adm active" showed the same power profile as the settings. After going idle and trying again in a few minutes, the bug disappeared.
I have no idea how to reproduce the bug, the featuer worked perfectly fine after rebooting the VM
|
nielsenb | Fully updated Fedora 41 compose, KVM (UEFI) on Dell XPS 9360 | ||
romangherta | Fedora-Workstation-Live-x86_64-41-20240910.n.0 on KVM | ||
seaninspace | Lenovo T470; 6.11.0-0.rc6.49.fc41.x86_64; tuned-ppd-2.24.0-2.fc41.noarch | [1] |
1.
Profile is not set to "performance" when setting /etc/tuned/ppd.conf's default to "performance" and restart tuned-ppm (or tuned itself). Maybe I'm doing something wrong? Also, when toggling XFCE4's
"presentation mode" the profile does not change.
The battery/charging detection works perfectly.
|
tasty0tomato |